Figures for printing; These will work best if you set your page set-up to 80%. They are 72 dpi, and just look a whole lot better if they are a bit smaller than the on-line versions.

If you want the originals, send me e-mail and I can send them to you in any format, any size. The scanned images were in TIFF and in high resolution.

Figure 1 - Stretcher tie-in

Figure 1a - Pass back method of safety tie-off

Figure 2 - Stretcher Rigging

Figure 3 - Load Distribution Anchor

Figure 4 - Z Raising System

Figure 5 - Butterfly Coil Procedures

Figure 6 - Edge Attendant Tie-in